Repair and own.

Service flow & 7-year parts

SERVICE-FLOW.md

Inbound Diagnostic

Upon receiving a WanderBaby unit for diagnostic purposes, follow these steps to assess its condition and determine necessary repairs or replacements:

1. Visual Inspection:

• Check for visible signs of damage such as cracks, dents, or liquid int

intrusion marks.

• Ensure that the privacy shutter and mic-kill switch function correctly

correctly (shutter covers lens, switch mutes microphone).

• Inspect LED indicators for correct functionality.

2. Functional Testing:

• Power on the unit and verify that it boots successfully without error

messages.

• Check video quality in 1080p HDR mode (for WV-BABY-STD) or 4K HDR mode

mode (for WV-BABY-PRO).

• Ensure audio quality is clear with stereo MEMS mic recording.
• Test breathing motion detection functionality and ensure it works accu

accurately without false positives.

3. Software Assessment:

• Verify that firmware is up-to-date and matches the expected version ba

based on the unit's SKU.

• Run a diagnostic test to check for any software bugs or issues affecti

affecting system stability.

• Confirm compatibility with supported third-party platforms (HomeKit Se

Secure Video, Google Nest) if applicable.

4. Environmental Testing:

• Ensure that the unit meets environmental standards (FCC Part 15, FCC P

Part 18, CE EMC).

• Test for electromagnetic interference (EMI) and ensure it operates wit

within acceptable limits.

• Confirm battery safety compliance with IEC 62133.

Field-Replaceable Units

Field-replaceable units (FRUs) for WanderBaby are designed to facilitate quick replacements without requiring specialized tools or extensive technical knowledge. The following components can be replaced on-site:

Lens Assembly

• Part Number: WB-CAM01
• Purpose: Houses the IMX377 sensor and ensures clear video capture.
• Replacement Steps:
• Power off the device and remove the back cover.
• Disconnect the camera cable from the mainboard.
• Remove the lens assembly by unscrewing it from the housing.
• Install the new lens assembly, reconnecting the cable securely.

Microphone Assembly

• Part Number: WB-MIC01
• Purpose: Captures audio in stereo quality for clear sound recording.
• Replacement Steps:
• Power off and remove the back cover.
• Disconnect the microphone connector from the mainboard.
• Unscrew the mic assembly from its housing position.
• Install a new microphone assembly, reconnecting it properly to ensure n

no interference.

Radar Module (Pro SKU)

• Part Number: WB-RAD01
• Purpose: Detects breathing motion using Infineon BGT60TR13C radar tec

technology for WV-BABY-PRO.

• Replacement Steps:
• Power off and remove the back cover.
• Disconnect any antennas and power cables connected to the radar module.

module.

• Unscrew or unclip the radar module from its mounting bracket.
• Attach a new radar module, ensuring it connects correctly to the mainbo

mainboard.

Battery Pack

• Part Number: WB-BAT01
• Purpose: Powers the device continuously for extended monitoring perio

periods.

• Replacement Steps:
• Power off and remove the back cover.
• Disconnect any charging cables or internal power connections.
• Unscrew or unclip the battery pack from its mounting position.
• Replace with a new, fully charged WB-BAT01.

Battery Service

Battery service involves replacement of the WB-BAT01 in case of failure or wear. Follow these guidelines:

Safety Precautions

• Always use approved batteries that comply with IEC 62133 standards.
• Wear protective gloves to prevent accidental discharge and skin irritatio

irritation from battery chemicals.

Battery Replacement Process

1. Discharge the Unit:

• Ensure all power is off before beginning any replacement process.

2. Remove Back Cover:

• Carefully pry open the back cover without damaging it or compromising

its waterproof seal.

3. Disconnect Internal Cables:

• Gently disconnect the battery from all internal connections, ensuring

no forceful pulling on fragile wires.

4. Install New Battery Pack:

• Insert a new WB-BAT01 unit into place and reconnect the power cables s

securely.

5. Seal and Test:

• Reattach the back cover tightly to ensure waterproof integrity.
• Power up the device to confirm proper operation with the new battery.

Firmware Roll-Back

In cases where a firmware update causes issues, roll-back procedures are necessary:

Pre-Rollback Checks

1. Backup Data: Ensure any critical user data is backed up locally or e externally before proceeding. 2. Verify Version Compatibility: Confirm that a previous stable firmware version exists and matches the device SKU.

Roll-Back Procedure

1. Download Correct Firmware:

• Obtain the correct version of firmware from official sources.

2. Prepare Device for Update:

• Power off the device completely and connect it to a computer via USB.
• Place the device into update mode by holding specific buttons during b

boot-up (refer to user manual).

3. Install Firmware:

• Transfer the downloaded firmware file directly onto the device's stora

storage space through the connected PC.

• Initiate installation using proprietary software or manual process as

per documentation.

4. Post-Installation Checks:

• Power on the WanderBaby and verify that it boots successfully with rev

reverted firmware settings.

• Run diagnostics to confirm all features work correctly post-roll-back.

post-roll-back.

Decommission + Secure-Wipe

Decommissioning a WanderBaby involves securely wiping data from the device and safely disposing of hardware components:

Data Wiping Procedure

1. Panic Button Activation:

• Press and hold the panic button combination (referenced in user manual

manual) to erase all recordings.

2. Factory Reset:

• Execute a factory reset through software or physical buttons, ensuring

ensuring that no residual data remains.

3. Verifying Wipe Success:

• Power on the device post-reset and confirm it starts as new with defau

default settings.

Hardware Disposal

1. Remove Battery: Unscrew or unclip battery pack WB-BAT01 for recycling. 2. Disassemble Cover: Carefully remove back cover to expose main components. 3. Component Removal:

• Safely detach and store all FRUs (lens assembly, microphone, radar mod

module) for potential reuse or proper disposal.

4. Mainboard Destruction:

• Physically destroy the mainboard by breaking it into pieces using safe

safe methods that prevent data recovery. 5. Documentation Retention:

• Keep a record of destruction and disposal actions in compliance with e

environmental regulations and company policy.

Ambassador Signature Provenance

Each WanderBaby unit assembled by an ambassador bears an engraved signature inside its back cover, ensuring authenticity:

Verification Steps

1. Remove Back Cover: Carefully open the device to reveal internal components. 2. Check Engraving: Look for a unique, hand-written signature corresponding to the assigned assembly ambassador.

3. Compare with Registry:

• Cross-reference engraved signatures against an official registry maint

maintained by WanderBaby HQ to confirm authenticity.

Signature Significance

• Validates that each unit is crafted with care and attention to detail.
• Provides a tangible link between user trust and product quality assurance

assurance.

Cost + 10 Percent Parts Table

Below is the cost summary for parts used in WanderBaby, including an additional 10% markup for overhead and contingency:

| Part Number | Description | Quantity | Unit Price (USD) | Total Cost with Markup (USD) |

| WB-CAM01 | Lens Assembly | 1 | $25.00 | $27. $27.50 | | WB-MIC01 | Microphone Assembly | 1 | $8.00 | $8.8 $8.80 | | WB-RAD01 | Radar Module (Pro) | 1 | $30.00 | $33. $33.00 | | WB-BAT01 | Battery Pack | 1 | $20.00 | $22. $22.00 |

Total Cost with Markup: $91.30

This table reflects the cost of essential field-replaceable units, serving as a reference for price quotes and inventory management within authorized service centers.

Open STL files

WanderBaby — Open Mechanical Files

Per the WanderVerse 7-year repair commitment, every mechanical file required to fabricate replacement parts is published here under a permissive license.

Files

• enclosure-front.stl: front bezel
• enclosure-back.stl: back cover (saffron-engraved internal signature)
• pcb-mount-bracket.stl
• battery-tray.stl: T5 Torx, no glue
• pcb-3d-step.step: full mechanical PCB outline
• drawings.pdf: assembly drawings + tolerance sheet

License

CC-BY-SA 4.0. Replicate, repair, modify, redistribute.

Engraved signature stays inside; do not place wordmarks on the exterior.